Setting Up WSFTP to upload to your site on T-One.net

Instructions: The following screens are duplicates of the ones that should
appear in your system (yours may vary slightly. Verify that your screen selections match these. Some screens may have been narrowed for simplicity.

1. After downloading and installing WSFTP you should see a screen very similar to the one on the left.

2. Click on the General Tab

3. The Profile Name: box is where you can enter what you want to call your connection. Example: My Homepage

4. The Host Name/Address: box should be filled in as on the screen to the left.

5. The Host Type: box should be set to Automatic detect

6. The User ID: box is where you type in your username with T-One. This is the same as you use to login to T-one and also the part of your e-mail address BEFORE @t-one.net.

7. The Password: box is where you enter your password for logging into T-One.

8. Account and Comment may be left blank

9. Make sure the Anonymous box IS NOT CHECKED.

10. If you want WSFTP to remember your password next time you upload files to your homepage check the box next to Save Pwd

11. Click on the Startup Tab

12. Click here for the next step.

1. Complete the box below Initial Remote Host Directory as on the sample graphic. All of your html documents, images, etc., MUST BE uploaded to this directory on the server.

2. The Initial Local Directory box is where you can tell WSFTP to look on your hard drive for your html files. If you enter the drive path here WSFTP will start with your html files showing.

3. The Advanced Tab and Firewall Tab may be left in their default settings.

4. Click OK

5. Click here for the next step.

1. You should now see a screen similar to the one above.

2. Near the top of the window you should see the following:
   1. In the text window under Local System you should see the files you have created on your hard drive.

   2. In the text window under Remote System you should see the files you have uploaded to the server. If you haven't uploaded anything yet, the right side of the screen will not show any files.

3. To Upload Files to the server:
   1. Click on a filename on the left side of the screen that you wish to send to the server. This will hi-lite the file.

   2. To select several files at once press and hold the Ctrl key while clicking on the other files you wish to send to the server.

   3. After having selected all the files you wish to upload to the server Click on the --> box in the center of your screen. This will upload the files and after they have finished uploading you will see the files appear on the right side of the WSFTP screen.

4. After the files are uploaded you will be able to access your web pages through your browser. To view your pages online enter the following in the address bar of your browser substituting username with your username at t-one.net, and the filename you are trying to access with the word filename. DON'T FORGET THE ~ before your username.

   http://www.t-one.net/~username/filename.htm

5. Hints:
   1. If the file you are trying to access is named either:   index.html or index.htm you can access your page without adding the filename to the web page address.

   2. The Internet is case sensitive, so it is best to get into the habit of using all lower case filenames.

   3. Be consistant in using the htm and html file extensions. If your filename is index.htm and you tell someone index.html they will receive a 'page not found' error.

   4. GOOD LUCK and HAVE FUN!!!